Etc Net3 I O Gateway Setup Guide Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Etc Net3 I O Gateway Setup Guide. ETC Net3 I O Gateway Setup Guide User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
I/O Gateway Setup Guide
Corporate Headquarters
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy Tel +39 (06) 32 111 683 Fax +44 (0) 20 8752 8486
Holzkirchen, DE
Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00
Hong Kong
Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325
Service:
(Americas) service@etcconnect.com
(UK) service@etceurope.com (DE) techserv-hoki@etcconnect.com
(Asia) service@etcasia.com
Web:
www.etcconnect.com
Copyright © 2012 ETC. All Rights Reserved. Product information and specifications subject to change.
4263M2200
Revision D 2012-05
Page 1 of 2
SERIAL
Analog In
Relays 1-8
Relays 9-16
10 Vdc Max
30Vdc, 1A Max
IO/OI
I/O
Push
Grounding
Post
Overview
This Setup Guide will guide you through the setup of the Net3 I/O Gateway including hardware, electrical and data
connections. Software configuration of your gateway is covered separately and relates specifically to the software
versions that may be running in the gateways.
• For Net3 configuration, please refer to the Gateway Configuration Editor (GCE) Online Help System.
• For use on ETCNet2 systems, use the ETCNet2 Network Configuration Editor (NCE) User Manual which includes
information about the Net3 gateways running in ETCNet2 mode.
RS-232 Serial Port
At the most basic level, the serial port on the I/O Gateway acts as a converter between standard
RS-232 serial strings of information and a Net3/ACN equivalent that is sent over Ethernet. This
allows a control console, or other ACN device, to have a remote serial port and to extend the
normal distance limitations of serial communications. The I/O Gateway does not act on this serial
communication, but acts as a bridge between RS-232 and Ethernet.
The serial property options available are (default settings are in bold):
• 9600, 14400, 19200, 28800, 38400, 57600 and 115200 Baud
• 7 or 8 data bits
• None, Even or Odd for Parity
• 1 or 2 Stop Bits
• None, Xon/Xoff, Hardware are the Flow Control options
Ethernet Connection
• PoE (IEEE 802.3af)
• 10/100Mbps data speeds
• Auto-sensing
• Auto-negotiation
• RJ45 and etherCON compatible
Reset Button
• hard reboot
Menu Button
• Activates the LCD backlight
• Advances display pages
LCD
• Displays gateway status
and configuration data
Activity Indicator
• Solid green LED indicates
network connection.
• Flashing LED indicates
network activity
Power Indicator
• Solid blue LED
indicates power
Activity Indicator
• Solid green LED indicates
network connection.
• Flashing LED indicates network
activity
Power Indicator
• Solid blue LED
indicates power
Analog Input Port
• Analog (0-10Vdc)
• Digital (on/off)
Relay Outputs
• Normally open contacts
• Normally closed contacts
• Max. Switching of 1A@30Vdc
RS232 Serial Port
• DB-9 port
• DCE pinout
Strain Relief
• strain relief clip for
dc power cable
DC Power Input
• 8-28Vdc
• Positive tip
• 3.5mm barrel
• 5 Watts usage
RS-232 Pinout
Relay Outputs
When choosing your connections (normally open versus normally closed) to the relay outputs, be sure to consider the default or powered off state
of the relay and how your connected device will react when the I/O Gateway is powered off or reset.
For example, if your device will activate with a closed circuit, don’t choose a normally closed connection and keep it open using a command from a
controlling Ethernet based device. This choice could result in your device activating at an unanticipated time during a software update or when the
gateway is not powered. You should choose the normally open connection instead as it doesn’t activate unless it is specifically directed to do so.
Analog Input Port
The analog input port is used to accept external contact closures and/or analog 0 - 10Vdc input (depending on software configuration) and send
them as Net3/ACN Ethernet messages to a networked control console or other ACN device. This port requires an external 10Vdc power supply to
operate. In On/Off mode (contact closure), the gateway supplies +5Vdc to the circuit through each input pin.
NOTE: Each relay supports a maximum of 1.0A at 30Vdc.
NOTE: A straight through cable is required to connect to a computer (use DTE pinout). Connecting to many remote serial
products requires a cross-over cable (use DCE pinout).
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
unused
Pin Connection
RS232-TX
RS232-RX
unused
ISO-ground
RS232-DSR
RS232-CTS
RS232-RTS
unused
Pin Connection Pin Connection
Analog In #01
Analog In #02
Analog In #03
Analog In #04
Analog In #05
Analog In #06
Analog In #07
Analog In #08
Analog In #09
Analog In #10
Analog In #11
Analog In #12
Analog In #13
Analog In #14
Analog In #15
Analog In #16
Analog In #17
Analog In #18
Analog In #19
Analog In #20
Analog In #21
Analog In #22
Analog In #23
Analog In #24
Analog In-Ground
Analog Input DB25 Connector Pinout Example circuit for Analog inputs Example for Digital Input (on/off)
+10v
common
External Power Supply
Connect to ground/pin 25
Connect to input/pin 3
Connect to input/pin
Contact Closure
(for example to trigger
a remote macro)
2
Connect to input/pin
+5 Vdc Input
(input/pins 1 - 24)
Ground (pin 25)
1
Motion Sensor
on
common
Choose your input connections based on your own system
Contact Closure
(for example to trigger a remote macro)
Variable resistor
(to provide 0-10v feedback)
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Normally Closed #1
Common #1
Normally Open #1
Normally Closed #2
Common #2
Normally Open #2
Normally Closed #3
Common #3
Normally Open #3
Normally Closed #4
Common #4
Normally Open #4
Normally Closed #5
Common #5
Normally Open #5
Normally Closed #6
Common #6
Normally Open #6
Normally Closed #7
Common #7
Normally Open #7
Normally Closed #8
Common #8
Normally Open #8
unused
1
2
3
4
5
6
7
8
9
10
11
12
13
23
24
25
19
20
21
22
15
14
16
17
18
Pin Connection Pin Connection
Relay Outputs 1-8 DB25 Connector Pinout
Normally Closed #9
Common #9
Normally Open #9
Normally Closed 10
Common #10
Normally Open #10
Normally Closed #11
Common #11
Normally Open #11
Normally Closed #12
Common #12
Normally Open #12
Normally Closed #13
Common #13
Normally Open #13
Normally Closed #14
Common #14
Normally Open #14
Normally Closed #15
Common #15
Normally Open #15
Normally Closed #16
Common #16
Normally Open #16
unused
Pin ConnectionPin Connection
Relay Outputs 9-16 DB25 Connector Pinout
1
2
3
4
5
6
7
8
9
10
11
12
13
23
24
25
19
20
21
22
15
14
16
17
18
1
2
Résumé du contenu
Page 1 - I/O Gateway Setup Guide
I/O Gateway Setup GuideCorporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fa
Page 2 - Optional Accessories
Page 2 of 2Power Up Using DC PowerWhen using an external power supply, the gateway must be connected to a network before being powered. Menu Structure
Produits connexes et manuels pour Équipement Etc Net3 I O Gateway Setup Guide
(2 pages)
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 2.385 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels