ETC Source Four LED Series Manuel d'utilisateur télécharger pdf (Page 2)

ETC Source Four LED Quick Guide

Install

Source Four LED Profile Page 2 of 8 Electronic Theatre Controls, Inc.

Install

Lens Tube

Step 1: Slide the lens tube into the shutter barrel.

Step 2: Tighten the lens zoom knob.

Step 3: Tighten the Phillips screw at the top of the lens barrel.

Install Fixture

Step 1: Hang or mount the fixture.

Step 2: Attach a safety cable.

Step 3: Insert additional accessories such as a top hat, etc.

WARNING:

Use only hardware rated for total weight of fixture and accessories.

A safety cable (or other approved safety device) must be securely attached

to the safety cable loop before loosening the clamp.

Disconnect the unit from power and DMX and allow the fixture to cool before

removing or installing the shutter barrel or other adapters, and all cleaning

and maintenance.

Low clearance position

General use position

1 2 3 4 5 6 7 8

Pas de commentaire

ETC Source Four LED Series Manuel d'utilisateur Page 2