ETC Installation GuideDesire® Series D22Desire D22 Page 1 of 8 Electronic Theatre Controls, Inc.Corporate Headquarters 3031 Pleasant View Road, P.O
2 Desire Series D22ControlPortableThe Portable D22 is provided with 5-pin XLR connectors on the back for in and thru connection to a DMX/RDM control n
3ElectricalThe Desire D22 Portable is provided with a permanently installed power cord with 3-prong Edison connector. Region specific connectors are a
4 Desire Series D22InstallationTerminationThe D22 Desire Series requires termination at the last fixture on a DMX/RDM line with a 120 ohm resistor.• T
5Installing the Canopy FixtureThe Canopy D22 Desire Series is installed on to a RACO 232 series 4 x 2-1/8 inch deep double junction box. The fixture i
6 Desire Series D22If using Category 5 for DMX/RDM input:a: Reference the Cat5 Cable Preparation for IDC Termination Setup Guide for instructions to p
7Canopy Fixture InstallationStep 1: Strip the fixture’s power wires back 1/2 inch (13mm).Step 2: Using the hole in the mounting bracket, hang the cano
8 Desire Series D22Installing the Track FixtureStep 1: Insert the DataTrack adapter into the track. The adapter only fits into the track one way with
Commentaires sur ces manuels