Etc Source Four Mini LED Manuel d'utilisateur télécharger pdf (Page 6)

Install Lens Tube

A lens tube must be installed prior to use of the Source Four Mini LED. There are

four lens tube sizes available; 19°, 26°, 36°, and 50°.

Step 1: Unscrew the beam focus knob from the loose lens tube.

Step 2: Slide the lens tube into the shutter barrel.

Step 3: Install the beam focus knob.

Adjustments

Adjusting the yoke position

The Source Four Mini LED provides multi-positioning capabilities within its yoke for

overall fixture angle.

Setting the angle with the yoke

Step 1: Loosen the yoke locking knob. Do not remove the knob.

Step 2: Tilt the fixture to the desired position.

Step 3: Tighten the yoke locking knob to secure position.

Beam focus knob

Yoke locking

knob

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Etc Source Four Mini LED Manuel d'utilisateur Page 6