Etc Source Four LED v1.6.0 User Manual Manuel d'utilisateur télécharger pdf (Page 23)

100

1 Installation and User Interface 17

Step 1: Secure the C-clamp to the yoke with the provided yoke bolt and lock washer.

Step 2: Place the C-clamp on the mounting pipe and secure by tightening the pipe bolt.

Step 3: Loosen the C-clamp pan screw and rotate the yoke to the desired position.

Step 4: Retighten the pan screw to lock the fixture.

CAUTION:

Tighten C-clamp pipe bolt to 15-20 ft./lbs. (approximately finger tight plus up to

one-quarter turn). Do not exceed 25 ft./lbs. Do not use excessive force.

Tighten the yoke pivot bolt to 5-10 ft./lbs. (approximately finger tight plus up to

one-eighth turn). Do not exceed 15 ft./lbs. Do not use excessive force.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

User Manual 1
Table of Contents 3
Chapter 2 4
Chapter 3 4
Appendix A 5
Appendix B 5
Introduction 7
Daylight and Tungsten 8
Fixture Components 9
Applications 10
Document Conventions 10
WARNING: 11
Contacts 12
Chapter 1 13
Specifications 14
Typical Power Consumption 15
Note About LED Fixtures 16
Hardware 17
Install Lens Tube 18
Aim Adjustments 19
Focusing the Beam 20
Shaping the Beam 20
Soft Focus Diffuser 21
CAUTION: 23
Adjusting the Yoke Position 24
Installation Clearances 25
Safety Cable 27
Fixture Weight 27
Connections 29
DMX Profile 30
Color Mixes 31
HSI and HSIC: 31
Color Matching 33
Direct Control 34
Fan Control 34
Tungsten and Daylight 35
Installing Accessories 36
Basic Menu Navigation 37
User Interface Overview 38
2 Basic Menu Navigation 33 39
Keypad Lockout 39
Lustr+ screen shown 40
Display Title 41
Input Settings 41
DMX Address 41
Menu Navigation 42
Operation 43
Home Screen Displays 44
3 Operation 39 45
Main Menu 46
Operation 41 47
Advanced Menu 48
Data Loss 50
HLL-2Min 50
HLL-4ever 50
Using Plus Seven Control 51
Regulated 52
Protected 52
Standard 53
Incandescent 53
Output Freq 55
Red Shift 55
Operation 51 57
Fade Time 58
Delay Time 58
[]. To discard 59
Edit (Daylight and Tungsten) 60
Copy to Other Fixtures 60
Save DMX as Preset 61
Sequences 62
Operation 57 63
Link Time 64
Finishing the Sequence 64
Master/Slave Operation 66
Current DMX In 67
Network Statistics 68
Operation 63 69
Individual Control (Ind Cntl) 70
Recalibrate Fixture 71
About Fixture 71
Backlight 72
BLght time out 72
Language 73
Status Indicators 73
Operation 69 75
Studio Settings 76
3 Operation 71 77
Studio DMX Control 78
Error Messages 79
Software Updates 80
Routine Maintenance 81
Quick Start 83
Configure 84
Quick Setups Menu 85
Studio Quick Setup 86
Advanced Settings 86
Menu Flow Chart 87
System OK 88
Menu Flow Chart 83 89
Menu Flow Chart 85 91
Press the Light Bulb button 93
Lustr+ and Studio HD xtures 93
To Te s t 94
To Recalibrate 94
Menu Flow Chart 89 95
B Menu Flow Chart 91 97

Commentaires sur ces manuels

Pas de commentaire

Etc Source Four LED v1.6.0 User Manual Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Etc Source Four LED v1.6.0 User Manual