Etc Source Four LED v1.6.0 User Manual Manuel d'utilisateur télécharger pdf (Page 28)

22 Source Four LED Profile v1.6.0 User Manual

Power and Data Cabling Requirements

Power

The Source 4 LED fixture operates on AC power, 100 to 240VAC/50-60Hz. The fixture must

be connected to a non-dimmable power source in order to avoid damage to its internal

power supply and other electrical components.

Data

The Source 4 LED fixtures operate on a DMX control signal or as standalone fixtures. The

fixture is supplied with a 5-pin XLR DMX input connector and a 5-pin DMX Thru connector.

DMX cables should be acceptable for DMX data transmission (not microphone cable) and

should follow the standard pinout. The optional secondary data pair is not used by the

Source 4 LED fixtures. The maximum DMX data run from any DMX source to the last fixture

in a chain is 1000 feet (300m). Source 4 LED fixtures are self-terminated.

See DMX Profile, page 24 for additional information on DMX addressing of Source Four

LED Profile fixtures.

WARNING:

The fixture must be connected to a non-dimmable power source in order to

avoid damage to its internal power supply and other electrical components.

Dimming will damage the fixture and void the warranty.

DMX512 pinout for five-pin XLR female

1 Common (Shield)

2 Data –

3 Data +

4 not connected

5 not connected

Push

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 99 100

Pas de commentaire

Etc Source Four LED v1.6.0 User Manual Manuel d'utilisateur Page 28