ETC Source Four LED Series Manuel d'utilisateur télécharger pdf (Page 44)

39 Source Four LED Profile v1.4.0 User Manual

Status Indicators

Figure-2.3 Status Indicators on the back of the fixture.

The status indicators are three, small, colored LEDs on the User Interface that indicate the

status of:

• Power — Illuminated blue when AC power is supplied to the fixture.

• DMX — Illuminates green when an active DMX signal is being received by the

fixture.

• Error — Illuminates red only when the fixture is experiencing a data error, high

internal temperature, or other abnormal condition.

Status indicators are on by default. You can turn them off through the Local Settings menu.

For more information, see Local Settings, page 69.

Screen Navigation

When the Source Four LED series fixture is powered up, a splash screen briefly displays,

followed by a status screen.

The menu system and LCD backlight are set, by default, to “sleep” after one minute of

inactivity. Any button press wakes the LCD backlight. You can set the inactivity time on the

Local Settings menu. To “wake up” the display and go to the button’s respective function,

press any keypad button. For example, if you press [Enter], the LCD backlight comes on

and the Main Menu displays. For more information, see Local Settings, page 69.

Figure-2.4 Main Menu with Quick Setups selected and the result of pressing enter.

Lustr+ screen shown.

Press [Up] or [Down] to highlight a menu item. Press [Enter] to select the item. The

asterisk (*) indicates that the item is currently active.

Quick Setups

*General

Stage

High Impact

Studio

2/15 Hue Fine

XT Arch

Main Menu

DMX Start Address: 001

Quick Setups

Advanced Settings

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 95 96

Pas de commentaire

ETC Source Four LED Series Manuel d'utilisateur Page 44