ETC Source Four LED Series Manuel d'utilisateur télécharger pdf (Page 78)

73 Source Four LED Profile v1.4.0 User Manual

Studio Settings

Lustr+ and Studio HD

The Studio profile produces only white light that is adjustable in brightness, white point, and

tint (green/magenta balance). The Studio profile can be operated in a stand-alone mode

from the user interface or can be controlled via DMX.

Operation From Home Status Screen (Studio Standalone)

When operating without an external control signal, the intensity of the white light can be

adjusted immediately and directly by pressing the UI buttons on the fixture while on the

home screen. In this setup, all the UI buttons change their functions from other setups.

Icons on the screen indicate which buttons to use for the settings.

When fixtures are connected together and there is no control signal, all adjustments that

you make on one fixture are automatically made on the connected fixtures.

Figure-3.43 Studio Status Home screen (Vivid, Lustr+, and Studio HD).

• To adjust the Intensity, press [Up] or [Down]. The range is 0 to 100%.

• To adjust the White Point, press [Back] or [Enter]. The range is 2700 to 6500K.

• To adjust the Tint, press [Light bulb] & [Back] or [Enter]. [Back] increases magenta

and [Enter] increases green.

• To return to the Main Menu, press [Home].

• To return to the Studio status screen, from the Main Menu, press [Home] or allow the

UI to time out and automatically return to status screen or press [Back].

Studio

Int = 100%

System OK

STUDIO MODE

4/5 Intensity

WhitePoint = 3200

Tint = 50%

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 95 96

Pas de commentaire

ETC Source Four LED Series Manuel d'utilisateur Page 78